New or newly cleaned leather can be protected with Leather Protector against dirt and stains. It protects against accidents on the basis of water, fat or oil, after which liquids with good absorbent tissue can be dabbed away. Leather Protector also restores the water repellent properties of leather.

The treatment does not change the look or feel.

This aerosol protection that is suitable for all leather and leather volaniline such as nubuck, suede and leather pilots (known. Sanded leathers).
Applications are, for example:
· Interior, such as furniture.
· Exterior, including garden cushions.
· Clothing such as sports and rainwear, etc.
· Car, boat and caravan trim.
 
  Processing instructions, Leather Protector 500ml
 
Only apply to new or newly cleaned leather.
Surface color should really be, first test an eye falling deel.Als issuing the color: DO NOT TREAT.

Hold the can upright and spray approximately 20-25 cm. away.
In steady jobs and spraying the treated surface to dry about 60 minutes. After 6 the maximum level of protection is achieved up to 12 hours! Check whether the sufficient treatment has been applied by placing a few drops of water on the surface. The water droplets must "pearls".
The water must pearls. If the water drops within 5 seconds repeat sink into the fabric treatment.

The content of the bus is sufficient for approximately 6 m². If there remains a white matter after drying, this brush (avoid extreme overdose). Remove deep stains in textiles with CLEANTEX vlekkenspray.
 
aftertreatment:
Regularly check the treated leather and, if necessary, treat with Leather Protector, especially if it is just cleaned intensively.