3 pack

New or recently cleaned textiles can be protected against dirt and stains with Textile Protector. It protects against accidents based on water, grease or oil, after which liquids can be dabbed away with an absorbent tissue. Textile Protector also restores the water-repellent properties of textiles. Are you looking for an environmentally friendly alternative? Then view the ECO fiber protector from James.

The treatment does not change the look or feel.

This aerosol is a protective agent that is suitable for all textile upholstery

• Applications are for example:
  Interior, such as furniture and curtains, wall textiles, table linen and lampshades.
  Exterior, such as blinds and garden cushions.
  Clothing, such as sports and rainwear, ties, etc.
  Car, boat and caravan upholstery.

Processing advice, Textile Protector 500ml

Only apply to new or freshly cleaned textiles.
Substrate must be colourfast, first test an inconspicuous part. If the color runs off: DO NOT TREAT.

Hold the spray can upright and spray at approx. 20 - 25 cm. distance.
Spray in even strokes and allow the treated surface to dry for approximately 60 minutes. After 6 to 12 hours the maximum level of protection is reached! Check whether the treatment has been applied sufficiently by placing a few drops of water on the surface. The water droplets should "bead".

If the drops of water sink into the fabric within 5 seconds, repeat the treatment.
The content of the can is sufficient for approx. 6 m². If a white matter remains after drying, brush it off (avoid extreme overdosing). Remove deep stains in textiles with CleanTex stain spray.

Post-treatment:
Regularly check the treated textile and, if necessary, treat it with Textile Protector, especially if it has just been intensively cleaned.